### Easy, printed in place, flat surface with only 3 colors.
With this file, you can check the transparency of your colors. Please compare them with the image above to check the results!
Recommended Colors:
-Black
-White
-Color
but you can check with any color you want!
This model is printed facing down.
**FAQ**
*What CWB means?*
C is for color, W is for White and B is for Black. It's a guide to know which colors are used in every test and in which position.
*Can I use other colors besides Black and White?*
Yes! You can use any color you want, just swap the color on the slicer.
*Wich use does this test have?*
You can use it to test if your filament transparency is good enough to print one of our Retrovibes prints!
*Can it be printed using another material?*
We recommend using PLA tested with our "Color blending tester" included in this file. But you're free to try with other materials, have fun!
*This is for multicolor printers?*
Yes, it's meant to be used only on multicolor printers.
*Only 3 colors, what's the trick?*
We take advantage of the natural transparency of the colors to make them blend with each other using thin layers.
With this technique, you can print with different values using only 3 colors!
*Can I change the layer height?*
We don't recommend changing the layer height, this model is specially designed to be printed in 0.2 layer height. We can't warranty good results with other heights.
If I don't have a multicolor printer, i will be able to print it?
Unfortunately no, this print is designed to be used only on printers with multicolor systems.
If you know how to modify G-CODES and have an idea to solve this, please contact me at hello@merla3d.com.
This model is a remix of the one that THESAMENAMETWICE made, he is the amazing artist responsible for the creation of this technique, check his unique works at [here](https://www.printables.com/@TheSameNameTwice).