There it is!

For people who dont want to wait anymore. Here is a reverse engineered Version of Aseteks Quick Release for custom wheels. It has very little to no play and is rock solid.

You'll need 2x M3x15mm Bolts for the lever and i used a 8 x 20 mm spring i had lying around from an extruder upgrade.

Both parts were printed with 85% infill.

It was quite time consuming to get this right, so a little donation would be appreciated.

If you have any questions, feel free to ask!

Have Fun!

Dont sell this Model or printed Versions without my constent. Thanks!