⚫ URSUS 1604 ⚫

!!!Warning!!!

Not suitable for small children.
The model contains many small parts,
risk of inhalation and suffocation.

Ursus of this type will be the only one. I will focus on the older ones. I only made it because it was in high demand. I changed the tires and chose the version of the lights on the side. Furthermore, the front end is extended like the 120xx series zetors. In the future, I will make one more Zetor Crystal, which will be from the 120xx series. Now it's Zetor 7745's turn. :-)

UPDATE

https://www.printables.com/cs/model/446803-zetor-crystals-update-for-attaching-a-trailer-no-s
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Follow me on YouTube for more info about what you can look forward for.
■ YouTube
➔ https://www.youtube.com/c/MrHanjak2017

■ Video

🔳 INFO 🔳

■ Steel sheet
➔ PEI

■ Nozzle
➔ 0.4

■ Material
➔ PLA

■ Infill
➔ 15%

■ Circuit
➔ 3

■ Supports
➔ NO

🔳Change of color + BRIM🔳

➔ 16 black - it is necessary to slow down the print to 70% and brim width 10mm)

➔ 38 BLACKyellow - change color [16.10] + BRIM

➔ 41 YELLOWorange (2x) - change color [2.00] + BRIM

➔ 39 BLACKwhite (2x) - change color [3.50] + BRIM

➔ 40 BLACKorange - change color [2.30]

More models coming soon! 😉

🔳 Model created by MrHanjak 2023 🔳