爬宠湿度计版AMS干燥盒 Drybox for AMS with Mini Hygrometer by lloydliu

lloydliu

3D Printer>3D Printer Accessories

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 20% infill

Designer

6.2 h

1 plate

4.9(75)

0.2mm layer, 2 walls, 20% infill

Designer

9.9 h

1 plate

4.4(5)

0.28mm layer, Speed, Generic PETG

2.4 h

1 plate

5.0(1)

Kompletter Set - 0.2mm layer, 3 walls, 10% infill

12.6 h

1 plate

5.0(1)

Boost

166

299

813

651

Released

Description

新增适配爬宠箱用的长方形嵌入式电子温湿度计版本的干燥盒，适合不需要将湿度计联网使用的用户选择搭配更成本更低的AMS干燥盒方案，电子湿度计尺寸约为：48*28.6*15.2mm，样式见照片示意。

你可以参考以下购买链接，仅作为样式参考，不代表个人推荐购买渠道。

淘宝：https://item.taobao.com/item.htm?spm=a21n57.1.0.0.4bb3523cCBBagY&id=591156941210&ns=1&abbucket=9#detail

Amazon：https://www.amazon.com/AikTryee-Hygrometer-Upgraded-Temperature-Greenhouse/dp/B07QMZL448/ref=sr_1_18?crid=127AXTUY8VG3T&keywords=hygrometer&qid=1701917179&sprefix=%2Caps%2C236&sr=8-18

*注意不要使用外置探头版本，外置探头需要额外的空间摆放线材和探头，本干燥盒不适配。

This update adds a new version of drybox that can be adapted to mini hygrometer, which is often used in reptile terrarium. For users who do not need to use a hygrometer online, it is an option to build a more cost-effective AMS drybox system. The size of the mini hygrometer is about: 48*28.6*15.2mm, you can find what it looks like during the picture.

You can refer to the following purchase links, which are only used as style references and do not represent personal recommendations for purchase channels.

Amazon：https://www.amazon.com/AikTryee-Hygrometer-Upgraded-Temperature-Greenhouse/dp/B07QMZL448/ref=sr_1_18?crid=127AXTUY8VG3T&keywords=hygrometer&qid=1701917179&sprefix=%2Caps%2C236&sr=8-18

*Attention: Do not choose the version with a external temperature probe, it requires a larger volume to accommodate the probe and cables, not suitable for the narrow environment of AMS.

Comment & Rating (88)

@jaider2902

Muy buen modelo, no tuve problema con las tolerancias en mi caso, además de verse bien estéticamente, la utilidad es grande!

@rustynaildesign

Print Profile

0.2mm layer, 2 walls, 20% infill

Printed great. Hygrometer snapped right in as well as the top door. I like how the door acts as a funnel too.

@Big.Daddy.

Print Profile

0.2mm layer, 2 walls, 20% infill

came out great thanks for sharing

@StreetFighter

Print Profile

0.2mm layer, 2 walls, 20% infill

Vielen dank

@josteb

Print Profile

0.2mm layer, 2 walls, 20% infill

Nice

@NewAxiom

Print Profile

0.2mm layer, 2 walls, 20% infill

Successful print and good model. One point from my side: I miss the guiding system for the lid of the small dry boxes. If you add this to your model, you will improve it!

The designer has replied

@lloydliu

Due to the narrow width of the slim drybox, there is less room for deformation. To facilitate assembly and disassembly, I did not incorporate a rotation guide groove on the thin dry box. The flip cover was designed to be easily removed so that when the desiccant box gets stuck on the rotation track, users can directly remove the cover from above and place it back on. There is no omission of the rotation guide groove, thank you for your feedback.