Not really a super fun colorful print, but I wanted to try one of my favorite cars. Always open to ideas, they dont have even have to pertain to hueforge. A lot of what I post I do for people because I am bored and not for points. Just having fun on here

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5.1

Swap Instructions:
Start with Black
At layer #8 (1.04mm) swap to Blue
At layer #10 (1.2mm) swap to Blue Gray
At layer #14 (1.52mm) swap to Jade White for the rest.