Some simple bins for organizing your drawers. Both Closed (O-bins) and Open (U-bins, with or w/out connector) available.

Attached are 3 examples, each 100x100x55mm

Use the U bins in case your print bed isn't sufficient to account for the length needed.

Parameters include:

Width, Height, wall thickness, corner radius and bottom thickness.

For the Connector model, tolerance and slot depth is also available.

File can be found on onshape: https://cad.onshape.com/documents/8aa1c05ecbdab67e4706188d/w/0c08a093babce883a15e53db/e/379518c44de63bc058fb2e5c