Pittsburgh Steelers LED Light Box by Protofusion

Protofusion

Art>Signs & Logos

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

8.4 h

3 plates

5.0(6)

Pittsburgh Steelers LED Light Box - for 1 AMS unit

Designer

12.4 h

4 plates

5.0(1)

Boost

114

172

Released

Description

Please visit my website at protofusion3d.com to support my work and view other products.

This prints in two separate pieces, the base and the main logo. These must be glued together.

If you only have 1 AMS, I have provided the separate files so that you can print and melt the plastic pegs.

I hope you enjoy!

Comment & Rating (21)

@h1ckman

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice print with the stand. Holes line up from top and bottom to run your lights through. no hole in the base, so add one. some light leaks and even on the second print with adjustments I still got them. but that's normal for me 75% of the light boxes I end up with those no matter what I try.

The designer has replied

@ProtoFusion

Thanks for the review. if you are getting light leaks. try to adjust your flow rate from .98 to 1. that helps me. you can also use 1 wall loop on first layer. glad you liked the print!

@h1ckman

there is no hole out the back to plug i LED. I guess i will just drill one.

The designer has replied

@ProtoFusion

you add them in the slicer as a negative object.

@h1ckman

Replying to @ProtoFusion :

ok, ill try to figure that out. all the other light boxes ive printed already have them. i didn't even think to look for it not having one. thanks!

@ProtoFusion

if you can't figure it out, message me on Facebook I'll help you out.

@ACEHOLE3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out awesome!! Printed great! Wish I understood the settings more so I could have printed the logo a bit thicker so it wasn’t so fragile and split at the seams!

The designer has replied

@ProtoFusion

adjust your flow rate to .1 standard is .098. you can also use 1 wall on first layer to help with this.

(Edited)

@ACEHOLE3D

Replying to @ProtoFusion :

Thank you sooo much.

@mills_1127

Print Profile

Pittsburgh Steelers LED Light Box - for 1 AMS unit

(Edited)

@coff24

what lights do you recommend for this print

The designer has replied

@ProtoFusion

I use WS2812B LED strips and install WLED on an ESP32 board.

@user_3100401939

I'm a complete "newby", only had my P1S for 4 weeks, but I printed this with no problems. Only 1 AMS but filament changes went without a hitch. Chose this lamp as I have a friend whose a Steelers fan and it's his birthday at end of February. I haven't finished assembly yet as I'm waiting on a light fiting to come, but all the parts fit together perfectly.

The designer has replied

@ProtoFusion

this is great feedback. thanks! I'm glad you had a great experience. I'm always curious how others turn out.

@coff24

Print Profile

0.2mm layer, 2 walls, 15% infill

great print