Nice drawing of kitten and christmas presents - optimized to be 3D printed using 4 colors and to have short slice time.
Feel free to experiment with various filaments, but use recommended filaments to get the same result.
Recommended colors are Black, Red, Yellow and White.
Don't forget to upload results of your prints :)
Generated using Hueforge.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
Filaments Used:
PLA Aurapol Black Transmission Distance: 0.2
PLA Aurapol L-EGO Red Transmission Distance: 2
PLA Aurapol L-EGO Yellow Transmission Distance: 2
PLA Aurapol White Transmission Distance: 1.7
Swap Instructions:
Start with Black
At layer #7 (0.48mm) swap to L-EGO Red
At layer #17 (0.88mm) swap to L-EGO Yellow
At layer #27 (1.28mm) swap to White for the rest.