Calvin & Hobbes - Sleigh Ride
aka Riders on the Storm
Framed 4 Color Filament Painting
AMS-ready
You might get away with only one white filament but
you would miss the nice snow effect you can see in the Pictures.
If you like you can also print with white pla only and then be creative with your acrylics or water colors, the contours are already there.
Easy without AMS:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #5 (0.48mm) swap to Orange
At layer #14 (1.2mm) swap to Cream White
At layer #26 (2.16mm) swap to Ivory White for the rest.
Bill Watterson, Creator of Calvin & Hobbes and Source Art, Thank You! A Lot!
This is Fan Art.