3D model description
After the release of the Nicki Minaj model from the Modern Warfare game, I was commissioned to create a couple of poses from Nicki’s Pink Friday album.
The client opting for a shared commission allows me to also sell the model to the general public as part of the terms of the commission, so here she is . . ..
As the net skirt was almost impossible to represent as a 3D print and leave the model visible under the nets, it was decided to create the skirt with actual net. .to this end the model is split to accommodate the net being glued to lower trunk without interfering with the fit of the upper torso’s, see the pictures for details.
So TWO full poses/models of the singer for your collection. .. enjoy
This Download is COSTUMES AND BODY PARTS ALL PARTS ARE INCLUDED AS IN PICTURES TO CREATE TWO FULL MODELS.
Based on Niki’s Measurements of 157cm Tall 40DD–28–45 the Model is 1/6th scale therefore at 157cm with heels . . .
Both models are 150mm in height and do not require bases to sit.
Pose1
P1 Head n Hair v3.stl
P1 Left Boot Pinned.stl
P1 Left Hand n Hair.stl
p1 Left Leg Pinned.stl
P1 Right Boot Pinned.stl
P1 Right Hand n Hair.stl
P1 Right Leg Pinned.stl
P1 Trunk.stl
P1 Upper Torso NO CHAINSv3.stl
P1 Upper Torso WITH CHAINSv3.stl
Pose2
P2 Left Boot.stl
P2 Left Hand.stl
P2 Left Leg.stl
P2 Right Boot.stl
P2 Right Hand.stl
P2 Right Leg.stl
P2 Trunk.stl
P2 Upper Torso NO Chains.stl
P2 Upper Torso WITH Chains.stl
P2 Head n Hair.stl
20 items in total.
PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.
Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
3D printing settings
3D PRINTING SETTINGS
Resin Printing;
Hollow 2.70 Raft 101%
Head’s, Upper Torso’s Lower Torso’s
DO NOT Hollow
Hands, gun hand, shoes
FDM
Arms 80% fill 0.12 speed 40
Rest at 0.16 30% fill, speed 50
ALWAYS dry assemble and “trim” parts prior gluing.
Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining especially the hands to pose1 !