Skull Lightbox
Copyright Claim
Skull Lightbox
Boost
19
20
6
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
5.6 h
2 plates
Boost
19
20
6
1
32
19
Released
Description
Use my print profile, it printed perfect on my P1S.
Electronics:
I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wires
The power supply and the DC barrel connector I used
https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Assembly:
- Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.
- Measure the length of the light strip and then cut it to length.
- Solder the wires and the barrel connector to the light strip
- Mount everything into the front part
- Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures
- Close the box
For more details check this light box.
Comment & Rating (6)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
this turned out SO GOOD!! reversed the colours by mistake but I think I like it more
(Edited)
The designer has replied
1
Reply
Glad you like it, please share a pic.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed perfectly! Used RGB lights to change the colors. Looks amazing!
1
Reply
The print profile is no longer public
the back plate is a different scale than the front. didn’t realize this until it was done since I printed directly off the app. currently printing another back plate that I scaled up
The designer has replied
0
Reply
Sorry for that, I added a fixed profile.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld