Swatches for you filaments. Text is configured in slicer, just change the current place holder. Due to current bugs in Bambu Slicer the text might move when you change the content, here a table with the positions of the text
Text | X | Y | Z |
Small: | |||
Manufacturer | 0 | 8 | 0.5 |
Type | 0 | 0.5 | 0.5 |
Color | 0 | -7 | 0.5 |
Medium | |||
Manufacturer | 0 | 15 | 0.5 |
Type | 0 | 7.5 | 0.5 |
Color | 0 | 0 | 0.5 |
Profile | 0 | -7.5 | 0.5 |
K Factor | 0 | -15 | 0.5 |
Large | |||
Manufacturer | 0 | 22 | 0.5 |
Type | 0 | 14.5 | 0.5 |
Color | 0 | 7 | 0.5 |
Profile | 0 | -0.5 | 0.5 |
K Factor | 0 | -8 | 0.5 |
3 different sizes, small, medium and large. The swatches contains the following:
Small: Manufacturer, Type & Color
Medium: Manufacturer, Type, Color, Profile & K Factor
Large: Manufacturer, Type, Color, Profile, K Factor, Wall test(04mm to 1.2mm, 0.4mm increments), Thickness test(0.2mm to 2mm, 0.2mm increments)
There is a gridfinity bin for the swatches, here, together with the small swatch it becomes 4u high, with the medium it becomes 6u and with the large swatch it becomes 8u.