Warning:

1. This is a huge Pixelart and takes really long to assemble. Because of the scale I recommend, using packing tape on the back of the pixelart if you want to move it around.
2. Use 0.2 mm height for the pixels and the clips. I tried printing it wiht 0.3mm height and the fit wasn't perfect anymore. :D

If you want to try this XXL challenge then proceed my fellow 3D print pixel enthusiast:

You have to print every pixel in the "desired" color. For easier printing - they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.

E.g.: “Light grey x4_38”

This transfers to:

• Color: Light grey
• Type: 4x connections
• Number: Print 38 pieces of this connector in the color light grey.

Use the picture as a reference to find the right position of the blocks. It took me around 5h to assemble.

I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)

Have fun! :D