Gear Fidget Keychain Tag
Remixed by
Copyright Claim
Gear Fidget Keychain Tag
Remixed by
Boost
69
152
40
Print Profile(3)
Standard Profile, 0.2mm layer, 3 walls, 15% infill
Designer
37 min
1 plate
A1 Mini Print Profile, 0.2mm layer, 3 walls, 15% infill
Designer
40 min
1 plate
Regular print, 0.2mm layer, 3 walls, 15% infill
33 min
1 plate
Boost
69
152
40
1
329
367
Released
Description
What better way to pass the time while you're waiting around with your keys than with a fidget toy!
This is a simple print-in-place model, and no supports or brim should be required. Note that if you want to use a regular key ring with this model (such as is shown in the pictures), you'll want to use a larger version (at least 3 cm in diameter) - as smaller versions will be hard to attach.
I designed this model from scratch for a key tag competition, but I'm noting this as a remix of NicoConex's cool gear fidget from which I gained some inspiration. I hope you enjoy!
Comment & Rating (40)
All
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
beautiful!
0
Reply
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
Neat simplistic design. Easy to print
0
Reply
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
Printed a couple and its smoothness seems to depend on the material, though I used PLA for all. If you find it stiff, try again with another one
0
Reply
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
easy print, need to break in
0
Reply
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
Nice to play with. A little bit big for a normal key.
0
Reply
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
I’m not sure what’s going on but I’ve tried this models 4 times with different beds and filaments but it seems to fail each time. as if it’s hitting the print and dislodging it. I’ll try again but not from the Handy app and see if that helps
0
Reply
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
printed ok, but did not spin smoothly
0
Reply
Print Profile
Standard Profile, 0.2mm layer, 3 walls, 15% infill
Zum testen von Filament benutzt, musste anschließend fast 25 Stück für die ganze Klasse meines Sohnes ausdrucken ;-)
0
Reply
Print Profile
A1 Mini Print Profile, 0.2mm layer, 3 walls, 15% infill
Well formatted, printed nicely.
0
Reply
Related Models
© 2024 MakerWorld