Don't Panic, just print it.
This is a pretty easy and quick print.
Print at 100% infill with a layer height of 0.05mm with a base layer of 0.15mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Hatchbox PLA Pro+ Red Transmission Distance: 5.3
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.4mm) swap to Red
At layer #20 (1.1mm) swap to Yellow for the rest.
For me, it printed in about 2hours 45min.
I hope you enjoy!