Dragon Scale Hexagonal Chainmail - Print in place by RileyDesigns

RileyDesigns

Toys & Games>Other Toys & Games

Contest Winner

Year of the Dragon Design Contest

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

4.1 h

1 plate

4.8(191)

0.2mm layer, 2 walls, 15% infill

4.6 h

1 plate

4.8(20)

TPU_0.2mm layer, 2 walls, 15% infill

5 h

1 plate

Boost

1084

1775

282

2.1 k

1.7 k

Released

Description

This is dragon scale chainmail, a print in place multi-use flexible fabric. This chainmail can be used from anything from a satisfying fidget toy to an integral part of you cosplay or costumes. This model is strong so feel free to play till your hearts content or weather it to deataile a costume. This model can be colored via bambu studio. For best results use a small layer height, but .2 works just fine. I have included multiple models in the raw model files including a single piece so you can make your own custom shapes. Everything but the single chainmail link stl file is reduced so it slices fast so beware of using high resolution shapes with this model (before this model was redeuced at a 20x20 chainmail it was over 34 million triangles). If there are any shapes you would specifically like Id be happy to make them and upload it as a profile.

Measurements

Each side of the hexagon is 7mm in length

Distance from center to center to link the chainmail together should be 13mm horizontally, and to get the second row of chainmail is over 6.5mm up 11mm

Commercial license

I have a commercial license available at https://cults3d.com/en/3d-model/fashion/dragon-scale-chainmail-commercial-use

feel free to send me a message on Makerworld to confirm this is the right model. Or send me a DM for a comercial lisence if you dont want to go through cults3d :)

Comment & Rating (282)

@user_1714696070

Absolutely terrific design!!! One of my first prints and it came out so good!! Very easy to manipulate and make unique. Thanks!!!

The designer has replied

@rileysavoy03

you have to tell me what filament that is, phenomenal choice in color

@user_1714696070

Replying to @rileysavoy03 :

I used Kingroon PLA Silk 1.75 - Red/Yellow/Blue on our Bambu P1S. Thanks again on a great design!!

@WeBe3Dprinting

Very awesome design. This one is printed is bambulab basic pla bambu green at 0.2 layer height at the bottom then gradually going to 0.08 at the top.

The designer has replied

@rileysavoy03

looks great!

@Kady3DPrinting

Replying to @rileysavoy03 :

This is the best make ever, good layer height

@thingspatprinte

Print Profile

0.2mm layer, 2 walls, 15% infill

printed great on first try

The designer has replied

@rileysavoy03

nice colors!

@Kady3DPrinting

Here’s my make https://kady3dprinting.com/model/dragon-scale-chainmail

The designer has replied

@rileysavoy03

Glad you enjoy it!

@Fin3dPrinting

Print Profile

0.2mm layer, 2 walls, 15% infill

amazing print!! it broke a little bit when removing from the build plate but it works great!!

The designer has replied

@rileysavoy03

glad you like it! sorry it broke, I haven’t had issues on the pei plate if I let it cool down to room temp, what plate were you using?

(Edited)

@Fin3dPrinting

Replying to @rileysavoy03 :

I was using a textured pei plate but I think it was the silk pla I was using. it was Bambu silk silver pla which is usually more brittle than other filaments.

(Edited)

@WeBe3Dprinting

polyterra rainbow 0.2mm layer, 2 walls, 15% infill. It looks and feels amazing.

The designer has replied

@rileysavoy03

I love that color!

@JuanBedollaJr

can you make one 250mm x 250mm for our 256mm beds with the edges able to be expanded for people who want to join multiple pieces together?

The designer has replied

@rileysavoy03

sure I’ll put together a full bed stl today. I haven’t quite worked out how to link multiple together but it’s on the agenda! I will warn you though, a full bed stl will take a super long time to slice, upload to printer, and I’m estimating over 30 hours of print time 😅

@rileysavoy03

just uploaded a linking piece to the raw model files

@ktiedt

Replying to @rileysavoy03 :

I know this a pretty old comment at this point, but just wanted to point out that one of the folks that did some early STLs of the "nasa fabric" came up with a 2 part piece for joining sections that consisted of a glue in plug that closed the loops after you attached the pieces. Perhaps inspiration for your joiners if you still need that solved? (not sure if Makerworld allows links but thingverse link below) https://www.thingiverse.com/thing:5049173

@chrizy0879

Print Profile

0.2mm layer, 2 walls, 15% infill

lässt sich gut drucken. Vielen Dank

The designer has replied

@rileysavoy03

Froh, dass Sie es mögen!

@peckerisabirb

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out very nice! Used Green-gray filament. Very fun to hold and is very cool.

The designer has replied

@rileysavoy03

Glad you enjoy the model, that was a great filament choice! Someone earlier today sent me a glow in the dark version so if you have it I’d highly recommend print in glow in the dark

(Edited)

@Proki34

Print Profile

0.2mm layer, 2 walls, 15% infill

Looks and feels nice, even more with multicolor filament

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.