When slicing I found that the .05 test was not sliced as a separate piece. This can lead to some misleading results. Someone might think it is a printer calibration error. Excluding that, The print came out very nicely. It seemed for me at least, If the seam was moved to the outside of the model everything down to the .10 rotated just fine.

Just printed this on my Bambu Lab A1 mini and it came out great! I used the '0.20mm Standard' preset but changed the 'Seam position' from 'Aligned' (default) to 'Random' and the 'Slice gap closing radius' from '0.049' (default) to '0.02' (required for the 0.05 test to be printed properly). All the knobs separated easily from the central hub — except for the 0.05 knob, which required a gentle tap with a hammer, but now that it is separated it is able to rotate and even makes a satisfying sound when it snaps into place. Thanks!

i like it.in muy p1s the 0,05 is part of the inner ring, just one piece

Printed on the A1 mini with good result. Only 0.05mm was stucked.

Works great. Actuall does work. and 0.05 is never gonna move lol

bro you need to test your print profiles before you upload them. the .05 has no space and was printed with the rest of the model and the testy things don’t stay in the model

Nice test for tolerances

very nice to have when u do some modeling

At least I know now. 😊

First Print! Nice Work.