Mario reworked (no watermark) Remixed by Bastien

Remixed by

Bastien

Tools>Gadgets

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

50% scaled, 8 colors, 0.2mm layer, 2 walls, 15% infill

68 h

10 plates

4.9(77)

0.2mm layer, 2 walls, 15% infill

39.7 h

11 plates

5.0(8)

Boost

608

973

150

2.2 k

3.4 k

Released

Description

WORK IN PROGRESS

First, I want to thank 86duino the original author for his excellent work, we can find it on cults and thingiverse.

I really like the work done but the watermark completely “distorts” Mario...so I made the following changes:

removed watermark on the right leg
removed watermark on both gloves
removed watermark behind the head (this one was hidden, I realized it after)

added “marks” on gloves
added theeth to the smile
added fully printable eye
added fully printable logo M

I have a multi-material printer and was able to print the mouth, eyes and M logo by painting from the Slicer, but I also printed a Luigi where the author had separated all the colored parts for everyone to print. As a result I created an assembly version of Mario by separating the M logo from the cap in 2 parts, the eyes in 3 parts and the mouth in 2 parts.

There is 2 folders:

Painting or MMU contains the closest files to the original, only the watermarks have been removed and the gloves have been modified
Multipart contains all the modifications but also the eyes, the mouth and the logo in several parts

The tolerances can be different depending on the calibration of your printers, make a test by printing the 3 parts of the eyes.

The model is 90cm high, happy printing

mario

Comment & Rating (150)

@Mitch23

I have very bad damage where the supports were removed. Any suggestions on how I can improve this?

The designer has replied

@Bastien

Do not print lying, print straight with supports at the foot junction.

@Mitch23

I tried that, worked great thanks! same thing for the face the orientation was wrong for that as well.

@user_3061931583

Replying to @Mitch23 :

can one of you guys post the correct version pls?

@magicnuggets

Print Profile

50% scaled, 8 colors, 0.2mm layer, 2 walls, 15% infill

This guy turned out amazing. I turned the pants head and hair to print more upright. Make sure you have a full roll of filament for the pants. Takes a ton. thank you

The designer has replied

@Tridense

Looks fantastic!

@sevenlilbears2

I was reading comments bc I wanted to turn pants up right or as close as possible. Do you have any recommendations on supports before I print him.

@MrGnarly

it's a me.

@emssouthernscen

How are you able to print the mustashe? I tried diffrent ways with supports. etc. and it keeps failing i have printed all other parts. mustashe is last piece for me

@MrGnarly

Replying to @emssouthernscen :

used designer profile

@Spoonman

Replying to @emssouthernscen :

Same problem here! I'm new to 3D printing and I can't find a solution to print the mustache on the A1 Mini! :( If anyone can help I would really appreciate!

@morales07302

Print Profile

50% scaled, 8 colors, 0.2mm layer, 2 walls, 15% infill

Pretty awesome print. Scaled down to 35% from the original which was at 50%, so it would fit in the A1Mini

@jy02419412

How high is 35%？

@morales07302

Replying to @jy02419412 :

about 13 inches

@jy02419412

Replying to @morales07302 :

thanks

@Terrancecgclark

Print Profile

50% scaled, 8 colors, 0.2mm layer, 2 walls, 15% infill

one of my favorite prints. enlarged and loved how he turned out. Awesome file. thank you for splitting into different colored pieces. even with an ams I prefer this method of printing.

@simonluebbert

Very nice print! Can you give me some information about your printing settings for the head? I printed it standing up (nose forward), but the support interfaces look very ugly. Did you use PETG or support material for the interface? Thank you in advance!

@Terrancecgclark

Replying to @simonluebbert :

I no longer have this print however I am 99% the nose printed separate. I use slim tree supports, critical areas only for my prints and this was printed with PLA. I did cut the infill to 8% which in no way made it weak or messed with its integrity.

@fabianbraun93

Where to get Luigi?

The designer has replied

@Bastien

[EDIT] Links updated luigi: https://www.thingiverse.com/thing:2939398 peach: https://www.thingiverse.com/thing:3105310

(Edited)

@Foxart

Replying to @Bastien :

the link is broken, could you update this? also where did you get the peach?

@Bastien

Replying to @Foxart :

Done 👍🏼

@eclipsecustoms

Awesome model printed so Mario is approx 30cm tall, everything scaled well but eyes print better as a multicolour print rather than separate pieces which are difficult to slot together.