I have owned a Nissan Titan for 5 years and I thought it was time to celebrate that a little bit. So here is a lightbox of the Nissan Titan logo.

It prints in two parts. The face is black and white. The back/base is black with a layer of silver in it to help reflect the LED lights.

You will need a couple of parts to fill in the holes that are located in the base.

The switch I used is from Amazon and can be located here: https://www.amazon.com/dp/B01N2U8PK0?psc=1&ref=ppx_yo2ov_dt_b_product_details

I also used this USB-C port: https://www.amazon.com/dp/B0C7CPYL79?ref=ppx_yo2ov_dt_b_product_details&th=1

And this is the LED lights that I picked up from Amazon: https://www.amazon.com/dp/B097379J1V?ref=ppx_yo2ov_dt_b_product_details&th=1

If you don't want to use the above then you should be able to get similar items from Aliexpress or similar market. The holes that re in the base are 19.7 X 13 for the switch and 14.3 X 5.45 for the USB-C port.

If you use Bambu Studio it should be possible to fill up the holes if you don't want to use the products that I did.

The current image is a render. I will be posting a real picture as soon as I can (I'm still printing Christmas presents currently).

The profiles I am using were created by RevHazlett for his GeneriBox Lightbox. They are very good and produce a great lightbox so I believe that this will print out perfectly. If you notice some issues though please let me know and I will work on fixing it.