For the kitchen aficionados who love cats (or just cat lovers with a kitchen): I bring you the kitty whisker!

Flat, hangable, and easy to store, this can be a purrrfect (had to) help for anyone who does whisking time to time… or all the time.

Useful with:

1. Supports a messy (or clean) whisk from sitting on a dirty counter.
2. Can be pulled down the whisk wires to squeegee excess mix back into the bowl.
3. The edge can be used as a soft scraper to scrape out the bowl you just whisked.
4. Brings the necessary “cat butt” into the kitchen in case you don't have the real thing which, if you have a cat, is a given.

Here are the basic print settings:

Material: TPU

Layer height: 0.2 mm

Infill: 15% You can try others but 15% worked well for me.

Support: None

Scaling: 100% This is for a whisk with a wire diameter of about 46mm. It should work for any size whisk but feel free to change the scaling but not that it will affect the wire thickness. Current whisk slot diameter is 1mm.

Orientation: Flat on build plate as shown.