Designed in house at Simply Models as a simple printable station platform for OO Gauge 1/76 Scale Model Railways.
Print Sizes For the Main Platform
The Straight Platform is L250 x W67.5 x H19mm.
The Entry Ramp is L109 x W67.5 x H0.1-19mm.
The Platform End is L50 x W67.5 x H19mm.
Station Area L250 x W156 x H19mm.
The detailing wires are printed at 250mm but can be cut very easy.
The Slimmer Platforms are
Straight 250 x 32 x 19mm.
Platform End 50 x 32 x 19mm.
Straight L250 x W40 x H19mm.
Platform End L50 x W40 x H19mm.
Printed on Bambu Lab X1 with 2x AMS units.
Ideal Setup
Make sure your bed has been cleaned correctly. Ideally warm water and dawn dish soap.
Bambu Textured PEI Plate. (Except for the Detailing platform wires, this requires smooth plate)
Turn OFF AUX Fan for ALL colours.
Leave the printer glass lid OFF.
Only Tested to print in PLA.
Required Colours
PLA; Yellow, Beige, White, Grey, Black, Matte Red.
PLA-CF; Dark Grey (Top tarmac)
Pictured Platforms used bambu filament.
STL file's are provided along with 3MF Direct Print.