A nice simple and slimline wall mount for PS4, PS5 and DVD sized cases.

This is designed to mount either horizontally or vertically to a wall and can hold quite a few games in a small space due to the overlapping nature of its design.

You can print as many brackets as you require, you will need 1 of each model to create a left and a right (or a top and a bottom) bracket.

The components interlock into each other and all have screw holes for a standard sized woodscrews (~4mm shaft, ~8mm head) to allow you to screw to the wall in as many positions if you require.

Personally, my poor attempt at an AV cabinet is in an under stairs cupboard, so this was perfect to let me store my games, make them easily accessible and don't take up the limited shelf space i have in there.

Supports will be needed from the build plate due to the latching mechanism & maybe in the screw holes if your printer needs assistance with bridging.

Post-Printing

Assembly

One important point to note, as you add on more and more bracket pairs, start fixing to your wall from the top!

The reason for this is that each time you add on a new bracket, you cover up the screw hole.

Essentially, screw in the top pair of brackets, ensuring a game case is in the bracket to allow you to set the distance between the left and right correctly, but don't screw in the screw all the way.

Then, slide in the rest of the brackets moving downwards, however many you need.

Last, stick a game in the middle and then at the bottom of your bracket set and screw the bottom two brackets into the wall.

Finally, tighten up all the screws and enjoy!

You can add on more brackets to the bottom of your stack as needed and attach screws to these (again, as you feel they're needed)