New update 12/10/2023
NO SUPPORTS NEEDED - No Support Multicolor Nozzle Sign with Size, Type and Nozzle installed Text by straight606 - MakerWorld
This is Version 2 of my nozzle installed sign. I added the nozzle steel type to this one. I printed this with Bambu Labs support filament for PLA. It is a delicate part when you are removing the support filament so take your time. I widened the model to give more strength to the sides when removing the support filament. The doors slide nice and smooth and the end caps fit nicely. I loaded the 3mf files for the Print Profiles, I printed this on my P1P since my X1C was busy with christmas prints! It Printed great! I will add STL files for the raw model files as well. For those who download those the settings are standard settings as far as the print goes. The settings are as follows-
Layer Height - 0.20mm
Wall Loops - 2
Top and Bottom Layers - 3
Infill Density - 15%
Print with Support
Support Settings
Top Z Distance - 0mm
Bottom z Distance - 0.2mm
Top Interface Layers - 2
Interface Pattern - Concentric
Top Interface Spacing - 0mm
Brim - No
If you like this Version or Version 1 give it a like and a rating! If you have any advice to make any improvements let me know! This is only my second design I have made, I'm still learning. Currently I am learning Blender so more models to come in the future!