PTFE Coupler Alignment Adapter
Remixed by
Copyright Claim
PTFE Coupler Alignment Adapter
Remixed by
Boost
3
2
1
Print Profile(4)
0.2mm layer, 2 walls, 15% infill PLA
Designer
21 min
1 plate
0.2mm layer, 2 walls, 15% infill PETG
Designer
30 min
1 plate
0.6mm nozzle, 0.3mm layer, 4 walls, 25% infill PETG
Designer
21 min
1 plate
0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill PLA
Designer
16 min
1 plate
Boost
3
2
1
0
15
10
Released
Description
This is an adaptation of another model which had a good idea but only supported the coupler on one side. I tweaked the item to extend the support length as well as re sized so that you can support the PTFE on both sides of the coupler as well as any other PTFE receiver so it works great to support printed splitters and other adapters as well.
Comment & Rating (1)
All
Print Profile
0.2mm layer, 2 walls, 15% infill PLA
Easy, quick print. Works well.
(Edited)0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld