Wider in the front so that I could fit a soundbar that couldn't fit before. For Hisense R6 or A65H TV Series and probably more. The default is the right foot mirror it for the left foot, you will know which is which by being able to read R or L on the part. I recommend printing in the orientation shown in the photo with at 0.2mm or more layer height (helps with layer adhesion), infill at 40%, supports on, 4 perimeters, 5 top layers. I printed in ASA in an enclosed chamber (you need good layer adhesion).

Support me on Patreon if you like my work or want a commercial license.