Hex Wall Adapter Mount for 10pc build plate rack
Copyright Claim
Hex Wall Adapter Mount for 10pc build plate rack
Boost
25
42
4
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
1.3 h
1 plate
Boost
25
42
4
0
72
22
Released
Description
Here is a mount for the hex wall mounting system. I created these to work with my 10 pc build plate rack. I made the spacing to allow mounts on all 4 corners of my rack to align with the spacing of the hex plate holes, although you can just use 2 mounts on the top of the rack to “hang” it from the hex wall. Files are labeled for what spots they mount on the rack. You'll need to print 2 sets of the 3mf file to have all four corner mounts. Uses 3mm x 14mm socket head cap screws to assemble, just like the rack. Link to the hex system below.
10pc Rack
https://makerworld.com/en/models/19526#profileId-18252
Hex System
https://www.printables.com/model/152592-honeycomb-storage-wall?fbclid=IwAR0sRJdQLZB3lQYV951zymndi7Jdg0Io-eEjoBFryvcsjj-pl9eSPPtGB0w
Comment & Rating (4)
All
Print Profile
0.2mm layer, 3 walls, 15% infill
Printed in Black ABS, came out great and holds strong on the hex wall.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Hat super geklappt.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
perfect fir for plates, as a note don't use long screws or the two slots on end won't work, I used what I had on hand and found this out
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld