Link Zelda and red moon - Wall art by Silverbwoy

Silverbwoy

Art>2D Art

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

4.4 h

1 plate

4.7(3)

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Matte Charcoal Transmission Distance: 0.6
PLA Matte Dark Red Transmission Distance: 1.5
PLA Matte Ash Gray Transmission Distance: 1.5
PLA Matte Ivory White Transmission Distance: 6

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Dark Red
At layer #11 (0.96mm) swap to Ash Gray
At layer #20 (1.68mm) swap to White for the rest.

Comment & Rating (5)

@McGobs

Print Profile

0.08mm layer, 2 walls, 100% infill

@AliceDmaus

Print Profile

0.08mm layer, 2 walls, 100% infill

(Edited)

@rambo0084

Print Profile

0.08mm layer, 2 walls, 100% infill

looks amazing, needs 1 or 2 more initial layers to be perfect. I frame these and the last of thickness on the right hand side is problematic.

The designer has replied

@silverbwoy

hola, yo no tengo el problema que mencionas en mis impresiones de este modelo. si aumentas más capas negras se pierden detalles del dibujo

(Edited)

@rambo0084

Replying to @silverbwoy :

I printed straight from the profile and model as provided and downloaded and that is the review. I can and will adjust myself to suit my needs, however, the single layer black base on hueforge prints cause them to be overly flexible. with the area's of the print that had other layers to it, it is fantastic, just the fact that the single layer black base goes completely to the edge of the design, a friction fit frame causes it to bow at that section.

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (5)

License

Related Models

Hueforge moon

Hylian Shield for Dummy 13

Stand for the Zelda A Link To The Past Map

Zelda Rupee - Wall Art