Just as a joke

If you know you know,

If you don't, as long as you ride the internet, the internet will show you lol.

made on hue forge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Pla esun Black Transmission Distance: 0.3
PLA Sunlu red Transmission Distance: 5
Pla esun White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to red
At layer #12 (1.04mm) swap to White for the rest.