This is my first Hueforge design.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    Polylite Black PLA Transmission Distance: 0.3
    Polylite Pro Gray PLA Transmission Distance: 0.5
    BambuLab Matte Ice Blue PLA Transmission Distance: 3.5
    Polylite Pro Cold White PLA Transmission Distance: 0.5

Swap Instructions:
    Start with Black
    At layer #6 (0.48mm) swap to Gray
    At layer #12 (0.8mm) swap to Ice Blue
    At layer #21 (1.04mm) swap to White for the rest.