All 3D-printed Good Fortune Dragon Gyroid!

Peel off the whole print carefully!

The hanging ornament has a fun gyroid of Good Fortune (福) enveloped by a elegant relief of a dragon in a traditional stytle.

I designed the tassel part that it can be shaped by a blower, resembling a tassel (So you don't need to buy one!)

You can even carefully peel off the prime line wholly from the back of the build plate (not the front one) and use it as a string to hang up the ornament, so that everything is 3D printed.

Layer height change for easy dual colour. Or you might colour up other part (for example the tassel) and make it a multicolour print as well.

祥龍獻福吊飾

吊飾以祥龍噴出一個能轉動的福字為主體，配以同心結。

流蘇部分自己打印後用熱風機吹一下可造形。

小心拔起打印後（Ｘ１／Ｐ１）在底板後方的擠出線再打個結就可成為吊飾上面的繩子。

模型接駁部分和流蘇部分比較脆弱，拿起時需小心。