Hello Fallout Fans, here's my stimpack design which I hope you enjoy as much as I do! This is a multi-part print and everything screws together for a very satisfying result. The first plate includes the main body and needle, and there are 3 different top designs for you to choose from - AMS Embossed, AMS engraved, and single color embossed.

A slightly overengineered stimpack design, this is supposed to have both AMS versions and colour swap versions but Bambu has stripped the gcode, so if you want to make a print like the one in the photo start the gauge with silver, swap to white (I used bone white) at layer 92, black at layer 96 and then back to silver at your discretion after layer 101.

As featured in this video where iengzeh prints this out in white and then paints and weathers it for an amazing result!

For the inner vial there is an AMS version with black lines, but you can just print using red and white/translucent/luminous and swap colors around layer 180.

The only the main body needs supports for the arms, be very careful removing the supports as the tabs break easily. Aside from that, a piece of red and blue filament are added between the holes in the arms between the tabs and the arm, and the gauge. I left a smaller hole for those wanting to use wire.

Raw files are available in the downloads section, please like and share your results!

If you'd like to buy me a Nuka to support this and future projects https://www.popsession.co.nz/products/buy-faran3d-a-nuka-cola