Cage for phone photograhpy or small mirrorless cameras by plucbernier

plucbernier

Hobby & DIY>Electronics

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.16mm layer, 6 walls, 80% infill

Designer

3.8 h

1 plate

4.8(10)

A1 mini 0.16mm layer, 6 walls, 80% infill

5.2 h

2 plates

Boost

156

227

Released

Description

Simple cage for mobile photography or videography. You will need to provide a phone holder. all holes are threaded with 1/4 20 or 3/8 16 threads. Good for mobiles or small mirrorless cameras.

See my other print «Phone Cage NATO handle» for a simple, compatible handle to fit the cage.

Comment & Rating (37)

@Andrea3D

Print Profile

0.16mm layer, 6 walls, 80% infill

I had to cut it because unfortunately I only have an A1 mini, but I managed to print it effectively, I loaded the print profile for the A1 mini in case someone else wanted to print it, now it just needs a comfortable handle, I see what I can study

The designer has replied

@plucbernier

thanks for the profile! your print looks good! I also have a side handle made for the cage if you’re still looking!

(Edited)

@sasanam

where can i download this phone holder ? i like it

@Andrea3D

Replying to @sasanam :

Hi, I'm trying to improve it as soon as possible I'll post it

(Edited)

@abrakadabra

Boosted

I really like this print so I made a MagSafe phone holder for it: https://makerworld.com/en/models/171630#profileId-188427

@920FLXERS

make x1 carbon compatible

@920flxers.

MagSafe not strong enough for dat

@lrodriguezmail

Any idea how this connects in the photo? https://makerworld.com/en/models/15968#profileId-52747

The designer has replied

@plucbernier

hi! you need some kind of phone holder to screw on the cage. Hope it helps!

@nakleh

I just printed the cage after seeing the Bambu A1 video (congrats!) and it's great! Do you have any corresponding handles that slide on like in the video? I found some other handles that can be screwed on but I figured I'd ask the creator if he knew of anything available.. @plucbernier

(Edited)

The designer has replied

@plucbernier

hi! thanks! I’ve used real NATO handles from Smallrig, but the ones in the video seem to be really nice and much lighter weight than aluminum. unfortunately I couldn’t find them so I might design some myself.

@nakleh

Replying to @plucbernier :

I found these handles with finger grips that worked perfectly.. I just had to increase the size to 103% to get the holes to line up. I did some color painting in Bambu Studio to make the grips a different color, but they are all one piece. Recommended! https://thangs.com/designer/TheBuildBay/3d-model/Side%20Handles%20for%20SmallRig%20%26%20Neewer%20Camera%20Rigs%20%26%20Cages-74834

(Edited)

@plucbernier

Replying to @nakleh :

thanks! I’ll have a look!

@user_2975075564

Print Profile

0.16mm layer, 6 walls, 80% infill

Prints really well, I used PLA support filament on my run. Fits my tripod just fine. Now to find a workable phone holder

(Edited)

@920FLXERS

Print Profile

0.16mm layer, 6 walls, 80% infill

Very easy and amazing and it feels great. Looks and feels better than buying one and Work so seamlessly.

The designer has replied

@plucbernier

thank you, I appreciate it!

@920flxers.

miss my old account 🤦‍♀️🥹

@JXCKA

I managed to print this with PLA TOUGH, very strong . can you also provide the stl file for the handle on top of your rig?

The designer has replied

@plucbernier

hi! the top handle from the photo is the one from the Canon C70 so I don’t have an STL for it! I might try to make one though!

@JXCKA

oh man I kinda wish I saw this earlier , yesterday I decided to just buy the handle , still , I think othes would like to print one, if you can design it and share I am sure most people would appreciate it. that rig is really amazing .