I Have used this spool holder for the last year with good success , I didn’t like a couple things about it so here we are to make my own . I made mine from scratch , but it looks the same and has roughly the same dimensions so I’ll classify it as a remix . I’ve listed the file off printables.
The ultimate spool holder -remix :
1.Made the frame thicker , taller and wider .
2.Made the drums/rollers wider, thicker , and have a bigger overall diameter
3. changed the way the spool rides on the drum , the Bambu spools were side ejecting with fast tool head movements . My ridges are lower and smoothed out , different placement makes the Bambu spools ride in the center and makes it not prone to falling over .
4 .Made the feet not slide in and are wider to make it more stable
5. Deleted the nuts used to capture the feet .
THIS FILE IS Optimized for printer performance check out these parts !! I spent a lot of time tuning this profile ..
Just 4 m3 x 8 Allen cap heads are used . This is for ease of assembly . Overall the unit is streamlined and tuned to be the best it can be . If you want to print mine so be it . If you want to print the original the link is there . Ty for looking
The bearings are skateboard bearings 608s and can get 10 for about 7$ and you will need 4
The screws are m3 x 8mm cap head and you will need 4
IF YOU LIKE MY MODELS PLEASE HIT THAT LIKE BUTTON . AS WELL AS FOLLOW , NEW THINGS EVERYDAY!!!