Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 1

PLA+ Sunlu Red Transmission Distance: 3

PLA+ Sunlu Fuschia Transmission Distance: 5

PLA+ Sunlu Blue Transmission Distance: 4

PLA+ Sunlu Green Transmission Distance: 3

PLA+ eSUN Light Blue Transmission Distance: 3.5

PLA+ Sunlu Pure Yellow Transmission Distance: 3.5

PLA+ Sunlu White Transmission Distance: 6

Swap Instructions:

Start with Black

At layer #3 (0.32mm) swap to Red

At layer #6 (0.56mm) swap to Fuschia

At layer #9 (0.8mm) swap to Blue

At layer #11 (0.96mm) swap to Green

At layer #15 (1.28mm) swap to Light Blue

At layer #18 (1.52mm) swap to Pure Yellow

At layer #19 (1.6mm) swap to White for the rest.