Kansas City Chiefs Helmet Lightbox by Britts Prints

Britts Prints

Art>Other Art Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

6.2 h

2 plates

4.9(21)

Boost

157

256

Released

Description

RECOMMENDATIONS

- use a textured PEI sheet
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color

Comment & Rating (27)

@JDinKC

Print Profile

0.2mm layer, 3 walls, 15% infill

awesome! have a few in my collection now. everyone loves it that sees it.

@DirtyT

Print Profile

0.2mm layer, 3 walls, 15% infill

Nice model! Go Chiefs!!

@BrainfishCreati

Print Profile

0.2mm layer, 3 walls, 15% infill

good profile

@KARENJACOBSEN.F

Print Profile

0.2mm layer, 3 walls, 15% infill

Hood, wish face had a white layer to bring all colors together and face is more sturdy. thanks.

@DoubleT

Print Profile

0.2mm layer, 3 walls, 15% infill

@JDinKC

How did you make the light spread so evenly? That looks amazing!

@DoubleT

Replying to @JDinKC :

I just ran a 5v led strip around the outter walls.

@Ccarestia

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed this as a birthday present. I’m blown away by how crisp and professional it looks. They’re going to love it!

@elementalsin

Print Profile

0.2mm layer, 3 walls, 15% infill

Looks great! Makes a great gift for a fan

@shpthree

Easy Print. Thanks for the cutout for the power!

@danib_747

Fantastic file, printed perfectly. back cover is a perfect fit and doesn't need any glue to hold it in place. Print profile settings worked perfectly.