OPTIMIZED FOR SINGLE AMS OR FOR THOSE THAT WANT TO USE LESS COLORS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kexcelled Chocolate Transmission Distance: 1.4
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #35 (2.88mm) swap to Chocolate
At layer #39 (3.2mm) swap to Orange
At layer #44 (3.6mm) swap to White for the rest.