This is Part 1 of the Reeds Abstract Art Set.
Part 2 is here :

https://makerworld.com/en/models/32982#profileId-29621

They look and feel quite spectacular. Hang them on a wall as a display piece.

Make sure to wash the bed with soap water and use glue adhesion before printing.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

PolyTerra charcoal black (Any Black. Prefer Matte)
Sainsmart Matte Gray (Any Gray. Prefer Matte)
IIID Max Tan (Tan/ Skin Color/ Khakhi)
Polylite white (Any White)

Swap Instructions:
Start with Matte Black
At layer #16 (1.36mm) swap to Grey
At layer #23 (1.92mm) swap to Tan
At layer #30 (2.48mm) swap to White for the rest.