Racing Track 90deg Turn - compatable with HotWheels by elmantec

elmantec

Toys & Games>Other Toys & Games

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 50% infill

Designer

3.4 h

1 plate

4.5(19)

Boost

106

114

Released

Description

EDIT: updated geometry for easier support removing

My son was very upset that all his track's sets has no turns in them, so I design and print this one. Compatible with Hot Wheels tracks. Nice, smooth and sturdy. Fits up to 4pcs per plate.

Be careful when removing the supports from the inside! I did it by sliding a razor blade first, to detach them from the model.

Now I have one happy boy! :)

I am also happy with the result, so more shapes and turns will come in the future. Just need to find the time to design them.

Hope that helps you too! :)

Comment & Rating (28)

@user_1519803231

Print Profile

0.2mm layer, 3 walls, 50% infill

Awesome.. but hard to remove supports X1c standard settings

(Edited)

The designer has replied

@elmantec

I redesigned it a bit. Check if you will like the new model. :)

@edenjennie

Print Profile

0.2mm layer, 3 walls, 50% infill

Corners printed great and we printed a couple supports we used small screwdriver and pliers, kids loved to help remove them. we have a total of 6 corners now, printed them in blue

(Edited)

The designer has replied

@elmantec

Thanks, mate! Glad you liked it. :) My kid loves it too. :) Have fun!!!

(Edited)

@Tutexx

Print Profile

0.2mm layer, 3 walls, 50% infill

cars fly right off at high speeds

The designer has replied

@elmantec

Yes, because there's no angle, they are not suitable for high speed.

@907FreshPrints

Print Profile

0.2mm layer, 3 walls, 50% infill

Came out awesome. Thank you.

@Challengx

Print Profile

0.2mm layer, 3 walls, 50% infill

@greenkohl23

Print Profile

0.2mm layer, 3 walls, 50% infill

Nice model, my son enjoyed it.

The designer has replied

@elmantec

Happy to hear that! :) My son loves it too.

(Edited)

@greenkohl23

Replying to @elmantec :

We are really enjoying also the 4 way cross. Can I ask you if there is a T-Cross on your roadmap. This is currently our missing piece 😉

(Edited)

@elmantec

Replying to @greenkohl23 :

That's a good idea! Will do it tomorrow ;)

(Edited)

@geniejhang

Print Profile

0.2mm layer, 3 walls, 50% infill

Model itself is fine. But hard to remove the support.

@lehmanpm

Print Profile

0.2mm layer, 3 walls, 50% infill

printed without issue and the cars are able to move around it without issue most of the time.

@csga5000

Print Profile

0.2mm layer, 3 walls, 50% infill

Prints with support that is annoyingly hard to remove. I think some manually painted support probably could have worked well enough and been a bit easier to remove. I also wouldn't mind a profile that only prints like 2 at a time. And since they're a bit short and sharp the cars can't take the turn fast at all. longer 90s, or maybe just doing 45s could help turn.