Venom HF

Here's another one of my favorite HF prints the one and only Lethal Protector!

Photo was produced in Night Cafe

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA+ Esun Pink Transmission Distance: 5 PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions: Start with Charcoal At layer #30 (1.4mm) swap to Ash Gray At layer #36 (1.64mm) swap to Pink At layer #42 (1.88mm) swap to Ivory White for the rest.