[3DP RNS] Worker_V1.2
Copyright Claim
[3DP RNS] Worker_V1.2
Boost
943
1524
832
Print Profile(7)
![[3DP RNS] Worker_V1.2 / 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US6c0f71e19b25ae/design/2024-01-07_d34b1d530884c.jpg?image_process=resize,w_100/format,webp)
[3DP RNS] Worker_V1.2 / 0.2mm layer, 2 walls, 15% infill
Designer
5.9 h
1 plate
0.2mm layer, 2 walls, 15% infill
2.3 h
1 plate
V.12,0.2mm layer, 2 walls, Gyroid,10% infill
6.2 h
1 plate
PLA No AMS 0.2mm layer, 2 walls, 15% infill
2.1 h
1 plate
Click to see more
Boost
943
1524
832
32
5.1 k
3.1 k
Released
Description
[3DP RNS] Worker V1.2 (3D Printed Robot)
- Strengthening the torso and knee joints.
- Refinement of the sharp edges of the elbows
ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
[3DP RNS] Worker V1.1 (3D Printed Robot)
- Modify torso joints
ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
[3DP RNS] Worker V1.0 (3D Printed Robot)
- Series : 2 Legs / Humanoid Type [Youtube Video]
- This Is an all at once print. Assembly not required :)
- If you subscribe to the YouTube channel [3DP RNS], ★ a new robot will be revealed.
- Thank you for your subscribing! It means a lot to me :)
- Commercial License [Patreon]
※ Notice
For my uploaded robot model to enable all joints to move, it's advisable to use a Brim.
If removing Brim is inconvenient or challenging, I don't recommend printing it.
Also, joint functionality may vary depending on the printer and filament you use.
I hope your print is successful and you can have a robot with well-functioning joints.
ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
[3DP RNS] Worker V2.0 (3D Printed Robot)
- [3DP RNS] Worker V2.0 Download [Patreon]
- Worker V2.0 can be obtained through Patreon (Hero) membership.
- There have been some changes to the joints and additional design details have been added.
ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
[3DP RNS] Astro V1.0 (3D Printed Robot)
- [3DP RNS] Astro V1.0 Download [Patreon]
- Astro V1.0 can be obtained through Patreon (Hero) membership.
- If the existing humanoid robot, Worker, had a design of straight lines, this robot has been designed with curves.
Comment & Rating (832)
All
A new robot is..?
The designer has replied
11
Reply
I can't wait!
2
Reply
it'll be a big hit
hope you'll upload it soon.
can't wait too
2
Reply
Finally, it's revealed today! Thank you for waiting. Wishing you joyful 3D printing.
1
Reply
能否上传一个STEP格式或者PRT 格式 谢谢
The designer has replied
0
Reply
对不起。我不以其他格式披露数据。
I'm sorry. I do not disclose data in other formats.
(Edited)0
Reply
Replying to @3DPRNS
好的 谢谢
1
Reply
Replying to @3DPRNS
能否分享一下打印技巧 我做了好几个 其中有几个自由度的关节不好动
1
Reply
Print Profile
[3DP RNS] Worker_V1.2 / 0.2mm layer, 2 walls, 15% infill
Great model, lots of fun to play with! I liked it so much that I made my own weapons that are compatible with the Worker figure. You can find the model here: https://makerworld.com/en/models/393534#profileId-294679
The designer has replied
3
Reply
The worker has become a soldier! You've created a cool weapon for the robot with the concept of a hexagon. Well done! Thanks for the photo, comment, and printing.
0
Reply
Print Profile
[3DP RNS] Worker_V1.2 / 0.2mm layer, 2 walls, 15% infill
Not sure if the raft is worth it or not. Model came out great but the raft is VERY STUCK to the model.
little bit of force and everything is poseable! awesome little bot
The designer has replied
2
Reply
Is the body color purple? Blue? It's like a color in between. It's very captivating. The yellow accent color also complements it well and looks beautiful. Thank you for printing!
0
Reply
Periwinkle, gold silk, and black! Everyone is very into this model, huge props to you!
0
Reply
打了三只比例的，1:1 1:1.18 1:1.2 都是只有球头关节能动，其它关节粘死了 T_T
The designer has replied
1
Reply
感谢你的打印。效果很棒！虽然有点麻烦，但尝试应用Brim进行打印怎么样？如果想要无Brim输出，尝试降低打印速度。
Thank you for printing. The effect is awesome! Despite being a bit bothersome, how about trying to print with Brim? If you want to print without Brim, try reducing the printing speed.
0
Reply
Replying to @3DPRNS
材料问题，换了一个牌子的PLA材料打印出来就不粘连了！感谢作者设计这么好玩的人形机器！
0
Reply
Replying to @FOXTWO
零件之间的间距很小，所以印刷条件比较苛刻。现在能够顺利地进行印刷，真是让我感到非常高兴！
The gap between the parts is tight, so the printing conditions are demanding. I'm really happy that we can print without any problems now!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
brim easy to remove and satisfying during the process of removing brim. happy with this model
2
Reply
Yeah, that's it! Tracer and Worker! So cool! The color selection with the cybernetic vibe is excellent. Thanks for the photo, comment, and printing!
0
Reply
Print Profile
V1.2 Multicolor and Monocolor Plates Version - 0.2mm layer, 2 walls, 15% infill
single color prints fast. 4 colors, not so much. Very solid model.
1
Reply
OMG! OMG! Awesome! I've never seen such a splendid robot before! It's so cool. Well done! Thanks for sharing the pictures, comment and printing! If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)
(Edited)1
Reply
Replying to @3DPRNS
Found your YouTube channel. Thanks for the praise. I really enjoy your models.
0
Reply
Print Profile
[3DP RNS] Worker_V1.2 / 0.2mm layer, 2 walls, 15% infill
Die kleinen Roboter sind einfach niedlich.
Der Druck funktioniert fast immer, mit PLA Silk ließen die Gelenke sich nicht bewegen.
Aber alles in Allem starke kreation.
The designer has replied
1
Reply
Wow, you've printed a lot of Worker robots! The colors are also diverse. The large robot in the last picture catches my eye too.
Thank you for the photo and comments! If you subscribe to my YouTube channel, it would mean a lot to me and give me more motivation :)
0
Reply
Replying to @3DPRNS
I found the big robot here: https://cults3d.com/:53542
0
Reply
Print Profile
V.12,0.2mm layer, 2 walls, Gyroid,10% infill
I changed some setting, and redid ptfe tubes which worked 10/10 really good
(Edited)
1
Reply
If having too many colors is a problem, try printing with just one color.
0
Reply
Replying to @3DPRNS
thanks for that, will do when I can
0
Reply
Print Profile
[3DP RNS] Worker_V1.2 / 0.2mm layer, 2 walls, 15% infill
First time trying out multi-color print with my AMS lite. Aside from the massive amount of filament waste, i’m super impressed with the tolerances on these joints. I printed one out earlier in single color and was able to get all joints to work. For this colored piece, the head and hand joints are super fused. I might need to use some pliers to see if I can gently crack the connection to get them to move.
The designer has replied
2
Reply
You printed it in the same color as mine! Well done! Thank you for printing!
You can make many more robots in the future. Don't forget to subscribe to my YouTube :)
(Edited)1
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld