I got the clamp-on Wen adjustable table/fence and made this quick setup system so I could center the table every time.

Step 1: Place the Wen Fence Center in the hole on the castiron table. Align the drill with a 1/4in drill bit to ensure the drill and table are centered.

Step 2: Place the adjustable table on the drill with Table Insert Setup Block in the middle. Line up the hole by eye, then lower the drill bit 1/4in to align all the parts. Check the back of the fence/table to ensure it's parallel with the cast iron table, then lock it down with the clamps provided with the adjustable table.

Bonus: You can use the Table Insert Setup Block to cut other inserts or as an insert if you need extra.

Enjoy!

Used on WEN 4212T and WEN DPA2412T

Updated: V2 I added the embossed WEN logo and a spot for a 6mm Magnet so you can store them on the drill base. If you edit the step files, please tag me on the reupload.