Devil Fruit - Gomu No Mi Container and Ornament for cash, gift, stash etc. by thelightspd

thelightspd

Art>Sculptures

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.12mm layer, 2 walls, 15% infill

Designer

5.3 h

1 plate

4.9(7)

Boost

173

Released

Description

THIS IS THE VERY POPULAR Gomu No Mi Devil Fruit going nuts on Tiktok and etsy this holiday season. This version is unlike ANYTHING you've seen on the internet. This model is a container. Otherwise I made a solid model… then made “negative” modifier for use in the Slicer. This basically turns your Gomu Devil Fruit into a stash container. Because of the complexity of loading models and setting up the “negative” modifiers etc. I can only reccomend using the 3MF… it's all setup and ready to go for Bambu.

Once printed the stem needs to be glued in. Sometimes you can friction fit… but a dab of glue goes a long way.

Comment & Rating (15)

@Aucruzto

Print Profile

0.12mm layer, 2 walls, 15% infill

Printed great but the stem is missing, any chance you could add it?

(Edited)

@CRF_3D_Prints

Try the stem from the Gomu Gomu devil fruit file by standitupstore and size it to 69 percent. I haven't done that yet, but I did match up the size of the fruits and this looks to be our fix until he updates the file. Let me know if it works!

(Edited)

@Aucruzto

Replying to @CRF_3D_Prints :

I just found out that the stem is included when downloading the raw files but Standitupstore's stem file has a better looking shape IMO. Thanks for the suggestion.

(Edited)

@CRF_3D_Prints

Replying to @Aucruzto :

okay, good to know that's there. thank you! ironically enough, I just printed this last night and can confirm it works. 70% and 100% sized fruits were made 👍🏻

(Edited)

@Mayday

Print Profile

0.12mm layer, 2 walls, 15% infill

works like a charm! I printed it in TPU and still came out great

@artefactos.make

no esta el tallo?

@CRF_3D_Prints

Looks great and can't wait to get to printing it! I did see there was no stem in this download.... did some searching and found out this matches up to a Gomu Gomu devil fruit done by standitupstore when scaled to 69 percent. So what I plan to do is print that stem at the 69 percent for the time being. Thanks for the cool model and we look forward to the stem update!

@vietfarmer21

does it need support?

@user_3834439030

Hey can you help me ,what about the stem?

@user_1474725064

Print Profile

0.12mm layer, 2 walls, 15% infill

@Dr.Zoidberg

Print Profile

0.12mm layer, 2 walls, 15% infill

@Maxwellfriedlan

Print Profile

0.12mm layer, 2 walls, 15% infill

@user_1190683055

Print Profile

0.12mm layer, 2 walls, 15% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.