Extreme Tollerance Test
Copyright Claim
Extreme Tollerance Test
Boost
77
160
76
Print Profile(2)
0.08mm layer, 2 walls, 7% infill
Designer
42 min
1 plate
![[PLA]realistic ;-) 0.2mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US23ee3afefd9859/design/2023-11-07_80e9f92676c47.jpg?image_process=resize,w_100/format,webp)
[PLA]realistic ;-) 0.2mm layer, 2 walls, 15% infill
23 min
1 plate
Boost
77
160
76
0
552
460
Released
Description
I always wondered what was the most accurate possible value that my printer could print, this is because I am a precision freak and I want my prints to be perfect!
With this test you can finally find out with absolute precision what is the minimum value you need to use to distance the walls of your inserts. and it is also a fidget spinner!
Comment & Rating (76)
All
[PLA ] realistic ; simply the best I've come across. Now I have the confidence to design my own creations. Thank you!
The designer has replied
0
Reply
Print Profile
[PLA]realistic ;-) 0.2mm layer, 2 walls, 15% infill
0,9 is my best 😔
(Edited)
The designer has replied
0
Reply
maybe try flow calibration, sometimes it helps if you are overextruding
(Edited)1
Reply
Print Profile
0.08mm layer, 2 walls, 7% infill
With .04 mm nozzle (WHITE PLA) I got only half (.09 .10, .11, .12) to spin on the first print, BUT,
with .02 mm nozzle (YELLOW PLA) --- EVERTHING SPINS ! Kudos to designer.
I'm sure I can get better with the .04 mm nozzle.
.04mm ----- .02mm nozzle :
0
Reply
Print Profile
0.08mm layer, 2 walls, 7% infill
Great Print. With a .4mm nozzle on a P1P 0.06 and 0.07 tolerance test will rotate. They do however need a little persuation (Push edges with fingernails) to get them moving. Printed with Bambu PLA Matte.
(Edited)
0
Reply
Print Profile
[PLA]realistic ;-) 0.2mm layer, 2 walls, 15% infill
very nice my best is 0.06 ✌🏻
(Edited)
0
Reply
A1 mini, PETG, 0.08 mm layer, works nicely up to the 0.07 circle.
Very useful model, I like it's compactness and the fact that the circles hold inside and do not fall off.
0
Reply
Print Profile
0.08mm layer, 2 walls, 7% infill
Able to move down to 0.07.
Bambu Labs A1 with AMS lite. 0.16mm Optimal @BBL A1, Generic PLA.
0
Reply
Print Profile
0.08mm layer, 2 walls, 7% infill
Work fine ! Block at 0,07 on my P1S
0
Reply
Print Profile
[PLA]realistic ;-) 0.2mm layer, 2 walls, 15% infill
Is it ok if I can rotate them all?😜incredible
0
Reply
Print Profile
0.08mm layer, 2 walls, 7% infill
simpel and fast test.
(Edited)
0
Reply
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld