This is a remix of the Arcade Cabinet from antirez scaled up almost 300%, split into multipart for better multicolor printing and I added a slit to slide in a Gift Card/Arcade Card to make it look like it is the Screen.

The Size for the Gift Card is 85.6 mm x 53.98 mm x 0.76 mm (ISO Standard 7810 ID-1 Norm)

Instructions:

1. Print all the Files
2. Glue the Sidepanel to the Arcade Cabinet, the Joystick-Ball on the JoyStick-Stick and the CoinSlot to the front of the Arcade Cabinet
3. Wait for the Glue to fully dried
4. Glue the Buttons and Joystick into the corresponding holes. TIP: Use less glue, so it does not ooze out of the holes when you put in the Buttons/Joysticks
5. Slide in the Giftcard
6. ENJOY!

MultiColor:

• Arcade Cabinet: Red (0-3,63mm), Black (3,63mm - 103,72mm)
• Sidepanel: Red
• Joystick Ball: Red
• Joystick-Stick: Silver
• Button: Red
• Coinslot: Black/Red

Recommended print settings:

• 2 Perimeters/Walls
• 3 Bottom/Top layers
• 15% infill (use 5% for the Cabinet and Sidepanel)
• 0.2mm layer height
• No Support

Special thanks to antirez!

Please Post your Makes and leave a Like!