Textured Fidget Infinity Cube: Angled Pack by austinvojta

austinvojta

Toys & Games>Other Toys & Games

Print Profile(15)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Voron 0.1

honeycomb, light (15% infill)

Designer

1.7 h

1 plate

4.9(616)

knurled, light (15% infill)

Designer

1.8 h

1 plate

4.8(138)

no texture, light (15% infill)

Designer

1.4 h

1 plate

4.9(194)

2 Stripes - Honeycomb - 0.2mm layer, 3 walls, 16% infill

2.1 h

1 plate

4.9(75)

Click to see more

Boost

1076

2007

1249

7.2 k

9.3 k

Released

Description

Buy a printed cube from me directly: AustinMakes.etsy.com

The latest and greatest fidget cube that you won't be able to set down! Prints in one piece and works right off the print bed.

Redesigned ground-up following the success of Yet Another Fidget Infinity Cube v2, my latest version includes multiple shapes and fun new textures, plus hinges that are even smoother without the need for break-in!

Variations

Printing tips

use 0.2mm layer height or lower to avoid hinges fusing
set vertical shells to 2+ perimeters for strength
try 100% infill for extra satisfaction!

Comment & Rating (1249)

@Craftncreations

I have used these stl files and your recommendations. I am still having bridging issues. Please Help!

The designer has replied

@austinvojta

Hi there. Happy to help. I’m a bit confused though because it looks like you’re printing it with 4 top hinges somehow, when the default orientation only has 2. Have you rotated it at all in the slicer? Any chance you can DM me with the gcode and/or 3MF you generated?

@Craftncreations

Replying to @austinvojta :

i just rotated it after print and took a picture to which bridges where bad. I did print it the way it loaded.

@austinvojta

Replying to @Craftncreations :

Ok -- perhaps you're using another model, and not one of mine? At the least, this one isn't in my "Angled Pack" found on this page where we're commenting. I'm not sure why your hinges turned out like that but am still happy to look at your gcode/3MF if you'd like a closer look!

@mcguirexo

Print Profile

honeycomb, light (15% infill)

I finally reprinted this specific cube and it came out great

(Edited)

The designer has replied

@austinvojta

Hi there! You're the first person I've seen have any issues with this model. Would you mind sharing what filament, printer, and print settings you were using?

@mcguirexo

bambu p1s. ziro filament and whatever settings you have saved for the print

@austinvojta

Replying to @mcguirexo :

Interesting. I’d love if you could give it a retry with a second filament. How did it break, specifically? One of the hinges just fell over while printing?

@3dcreations1213

Print Profile

honeycomb, light (15% infill)

I couldn't of asked for a better fidget cube. turns out perfectly everytime never need to break it in before using it.

The designer has replied

@austinvojta

Love it, glad you are enjoying and thanks for sharing a pic! Nice 2-tone silk PLA.

(Edited)

@3dcreations1213

Replying to @austinvojta :

I just printed one in a tri-color silk pla. and I think I like this one better. it is supposed to be black/blue/purple

@austinvojta

Replying to @3dcreations1213 :

Ah yeah that one looks awesome too!!

@Desmodromic

Print Profile

honeycomb, light (15% infill)

Printed in clear PETG, gives it a fun “crystal” look

The designer has replied

@austinvojta

The clear look is definitely cool, thanks for the rating!

@henrybachhuber

Replying to @austinvojta :

you should do it in clear yellow...so it looks like a real honeycomb!

@VP_8411

had a issue, seams to be common after several failures. just can bridge correctly in the center. photo is of the bottom after I flipped it over so you can see the failure spots too center Hing.

The designer has replied

@austinvojta

Mmm I think I have a solution for this. I’m out of town for the weekend, but if I send another file Monday would you be willing to test a tweaked design?

@VP_8411

Replying to @austinvojta :

yup

@austinvojta

Replying to @VP_8411 :

Good news -- as of today (2023-12-06), I've uploaded new versions that address this issue! I'd love for you to give it another go and report back if it solves your problem.

@Lowery09

Print Profile

2 Stripes - Honeycomb - 0.2mm layer, 3 walls, 16% infill

Printed perfect!

@austinvojta

The purple and red look great, thanks for sharing a pic!

@vin_

@austinvojta thanks for sharing these models they are amazing. I have been printing them in different random colours and my son has been giving them away at his school to his friends. it’s been a success. I have had some failed prints where the connector/hinge failed for some reason. And I would like to repair them, so I was wondering if you could make the hinge available separately so that I can try to print it in PETG or TPU to replace the ones that failed and/or broke. The colours won’t match but hey all in the name of saving a print right! thanks again and here is a photo of some of the ones I printed. Using Comfrow tri colour filament and PETG fluorescent for the red. printed on a Flashforge creator pro 2 with 0.15mm layer and 91% percent extrusion to make sure they move very freely. And of course 100% infill for extra fun.

The designer has replied

@austinvojta

Hi Vin -- sure, I can share an STL for just the hinge. Drop me a DM and I'll get that your way this week!

@vin_

@austinvojta thanks for the help, I have fixed my failed prints with TPU hinges. I was able to force it in without damaging the cube. TPU compresses just enough.

@bucklenshackle

Print Profile

honeycomb, light (15% infill)

Perfect! I've been printing your OG printables model since I started this 3d Printing Journey. I love the new ones you've made Austin! Can't wait till you allow the 3d Print Community to sell these newly designed ones, however you may do so, you got my sub.

(Edited)

@PrimeTower

Print Profile

honeycomb, light (15% infill)

Great design and it’s FUN to play with !

The designer has replied

@austinvojta

Love it, thanks for sharing your print!

@Chris3DPrints

Print Profile

no texture, light (15% infill)

Prints great. Used 100% infill for weight, my son loves these. Printed one in black and the other in the OVV3D silk PLA with red/blue/green. With the silk the colors match if it is flipped one way then show different colors when flippped the other, cool effect.

The designer has replied

@austinvojta

The silk looks phenomenal, thanks for sharing your print!

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.