F1 2022 looking body for the HPD EVO developed by Kent Asplund. It requires the ESC to be mounted vertically. Print vertically and halo doesn't need supports. Requires 2x M3x6-10mm fasteners to attach the nose to the body from the nose side. Tool clearance is not optimal on the nose but doable. Drive the screws into the main body first to cut the threads and after attach the nose. The main body is one piece that maybe to large for smaller printers. It might work with some brushless motors depending on the orientation for the cables to clear through.

See my other other models for multi color printing with a wider body.

Edit: added: split venturi for multicolor. Search my name for the 2022 rear wing and front wing for this body.

Edit 2: The newest HPD Development front chassis will not work. Use the front chassis in this link.