Tired of cleaning your DeLonghi and not having a large enough container to fit under the nozzles? I have the solution. Now you can place almost any container in front of the machine and let the machine do the work without emptying the container all the time. Or as I prefer to do it! I place the machine in front of the sink and let it drain the liquid straight down!
Now it's fun to service the machine and I can enjoy my coffee more!

This is a two part print, a “slide" for the coffee dispenser and a tube for the milk frother.

Just push them on and enjoy.

I recommend to print the tube standing on the tall part and use a wide brim. Support is not necessary for any of the models, but on the pipe you can add one to get some stability towards the end if that's a issue, and use tree support in such case.

Important to calibrate your filament before print. Flow Dynamics and Flow Rate. I recommend PETG for a little more heat resistance.

You may need to use X-Y compensation for holes if any of the parts don't fit correctly, That's why I recommend proper calibration before you print.

I'm also working on a more advanced tube that may come as a update later that will let you to replace the milk frother tube and twist/lock the cleaning tube in place instead.