Elegoo Cardboard Spool Adapter for AMS. Quickest Print, No Glue, Less Material!
Copyright Claim
Elegoo Cardboard Spool Adapter for AMS. Quickest Print, No Glue, Less Material!
Boost
30
47
35
Print Profile(1)
0.2mm layer, 3 walls, 10% infill
Designer
14 min
1 plate
Boost
30
47
35
1
163
331
Released
Description
This is a very simple spool adapter for use in the AMS, to allow the use of Elegoo cardboard spools.
Prevents AMS errors
Allows smooth rolling in the AMS
Very quick to print
Snaps on, no glue required to hold it in place
Reusable
Uses very little material, only 6.5g.
Comment & Rating (35)
All
Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill
Printed fast with elegoo rapid PETG. The fit is good and the model is simple without unnecessary logos and texts. I did some filing to the seam, rolls probably fine without filing though.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Perfect fit
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
good fit, fast and good quality
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Printed fine, unfortunately the model itself is flawed. I tried it across 4 different spools from different manufacture dates and the adapter was oversized on all of them. I resorted to CA glue it on on of them so i could at least get one use out of it before it goes in the trash.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
This is the only cardboard spool ring I've tried which I've had no issues with
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Printed fast and easy, fits Elegoo spool perfectly and very little filament consumed.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Printed at 99% in X and Y for a tight snap fit. Could have a slightly larger flage to hold it onto the spool but all in all works well.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Works like a charm and prints good.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Passt auf Elegoo Spule wunderbar, läuft im AMS top!
(Edited)0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
© 2024 MakerWorld