The multi-holder (3MF files with and without Bambu logo) stands alone or can be held on the housing (acrylic, aluminum, metal and wood) of the printer.
It can hold up to 6 printing plates. In addition, adhesive spray and glue stick can be stored. Who doesn't use adhesive spray, the round holder can be used for other things.
Magnetic receptacles are embedded on the back of the holder. With additional magnets on the inside of the printer, the holder stays in position. The recesses for the magnets are suitable for 12x2mm neodymium magnets from Hornbach or Amazon.
I use 2 for inside the printer and 2 on the holder. There are 5 cutouts in the holder, but on my P1S the 2x2 are sufficient.
Infill: 20% - lightning!!
It is important to note the support settings.
Slot 1: PLA/PLA+
Slot 2: PLA/PLA+ Logo green
Slot 3: PETG
The support material can be easily removed with a pair of needle-nose pliers and a half turn.
Keep it simple!