Under Desk Laptop Holder
Boost
309
668
58
Print Profile(4)
PETG, 0.2mm layer, 3 walls, 15% infill, 10mm brim
Designer
18.7 h
3 plates
Scaled for 1" Laptop, 0.6mm nozzle, 0.36mm layer, 3 walls, 15% infill, 12mm Brim
4.9 h
3 plates
V3 less than 6h
5.6 h
1 plate
High Speed-PETG-CF-0.28mm layer, 4 walls, 15% infill
7 h
1 plate
Boost
309
668
58
2
761
356
Released
Description
Well ventilated under desk laptop holder.
No supports needed.
I printed at 0.2mm layer height, 3 walls and 15% gyroid infill. Add brim for better bed adhesion.
You will need to clone the part and mirror it for the other side. (Left/Right version)
Recommend PETG or other higher temp resistant filaments.
Comment & Rating (58)
All
Print Profile
PETG, 0.2mm layer, 3 walls, 15% infill, 10mm brim
comes out great and nice
3
Reply
Print Profile
Scaled for 1" Laptop, 0.6mm nozzle, 0.36mm layer, 3 walls, 15% infill, 12mm Brim
👍🏽
1
Reply
Print Profile
Scaled for 1" Laptop, 0.6mm nozzle, 0.36mm layer, 3 walls, 15% infill, 12mm Brim
Really usefull!
1
Reply
Print Profile
PETG, 0.2mm layer, 3 walls, 15% infill, 10mm brim
Nearly perfect profile. Printed in Geeetech PETG silver.
1
Reply
Print Profile
PETG, 0.2mm layer, 3 walls, 15% infill, 10mm brim
Great Stuff!
1
Reply
maybe is me but aren´t them same side?? I`m trying to reflect one of them in bamboo studio but i just do not find that option... I´ll keep looking for the solution as it should be straight simple I guess...otherways the file wouldn´t be here isnt´t it?
The designer has replied
1
Reply
The part needs to be duplicated and the duplicate must be mirrored. I use Orca Slicer, but expect it to be similar in Bambu Studio: Right click on the object while in the "Prepare" tab, choose "clone" - set 1 instance. Right click on the cloned part, then select "mirror".
1
Reply
Replying to @KG3Dee
you should definitely put this in the description, or save a different plate with it flipped. Because I also printed a useless bracket without knowing,
1
Reply
Replying to @dtfiori92
fr
0
Reply
what kind of screws are you using for this?
The designer has replied
0
Reply
There are 3 countersunk Ø5mm holes on each side.
0
Reply
Print Profile
V3 less than 6h
(Edited)
Bed Adhesion Issue:Not enough bed adhesion. I attempted this print twice with different build plates and both failed mid print.
0
Reply
Add a brim (10-15mm) or use glue for better adhesion.
0
Reply
Replying to @KG3Dee
I printed via Bambu Handy. It’s not possible to add a brim when using the app.
(Edited)1
Reply
Replying to @Thully
creator needs to slice the file with brim added then upload
0
Reply
Print Profile
PETG, 0.2mm layer, 3 walls, 15% infill, 10mm brim
Prints great, a little short for my Macbook Pro 16" so would print it longer next time but no fault in the model
0
Reply
Print Profile
PETG, 0.2mm layer, 3 walls, 15% infill, 10mm brim
Not the best print, doesnt look that nice.
supports are not the best
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld